Old Dog, New Tricks
With over a decade of research and innovation, the Twister T2 is the number one used trimming system among commercial producers worldwide and is engineered to meet the volume and regulations of today’s most demanding cannabis and hemp facilities.
The new T2-built with the same consistency, durability, and reliability that medium to large scale producers have grown to love and is now through working alongside the most strict producers to ensure your production meets the required health and safety requirements.
- INCREASED PRODUCTIVITY, The 11 StaySharp self-sharpening blades can give you 19,250 cuts per minute, reducing a 20-minute job to just 30 seconds.
- TOUGH TRIMMING MACHINE, Trim up to 11 pounds of dry buds or 35 pounds of wet buds in an hour.
- PRECISE CUTS, Using its patented blade geometry, you can cut with precision without damaging your buds. The QuickClick technology gives adjustments of 0.0009 inches per click.
- SAFE TO USE, Made with stainless steel and food-grade materials, the Twister T2 Trimmers also have safety sensors and emergency stop mechanisms to protect users from injury.
LOW MAINTENANCE, Takedown in 10 seconds for cleaning, and hose down without worry. The Twister T2 Trimmer has watertight electronics and motors so that you can hose it down after use.
- Backed by a 10-year standard warranty
- INCLUDES Tumbler, Trim Collection Bag, and Hopper
The Ultimate Power Couple
The Trim Saver™ is a revolution in trim collection and preservation and provides maximum separation efficiency of trim, collecting over 90% of your product in a food-safe, easy to clean, stainless steel collection bin.
The Trim Saver™ uses radial cyclone technology to collect your valuable trim, effectively bypassing the impeller used in traditional vacuum-based trim collection systems to provide extract-ready trim to maximize your revenue.
**Add on a Trim Saver for $3,234**
T2 TRIMMER PRODUCT SPECS
TWISTER T2 TRIMMER
|Input Voltage||120V, 60Hz|
|Blade Motor||1HP, 750 W, Fan Cooled, Stainless|
|Tumbler Motor||1/30HP, 25W, Epoxy Coated, Watertight|
|Weight||215 lbs / 97.5 kg|
|Shipping Weight (complete w/leaf collector)||420 lbs / 190 kg|
|Cut Height||.040″ / 1/25 / 1mm|
|Length||42.5in / 107.9cm|
|Width, with wheels||27.5in / 69.9cm|
|Width, without wheels||20.5in / 52.2cm|
|Height||32.5in / 82cm|
|Circuit Breaker Required||20A, 120V|
|Connector (Plug)||NEMA 5-20P|
|Height without wheels||30.5in / 76cm|
|Discharge||6″ / 152mm|
TWISTER T2 LEAF COLLECTOR
|Motor||2HP, UL & CSA Approved, Fan Cooled|
|Motor Speed||3450 RPM|
|Airflow Capacity||1700 CFM|
|Static Pressure||10.5in of H20|
|Impeller||12″ / 305mm, Balanced Aluminum|
|Inlet (cyclone)||6″ / 153mm|
|Height||36in / 91.5cm|
|Weight||123lbs / 56kg|
|Circuit Breaker Required||15A / 240V|
|Connector (plug)||NEMA 6-15P|
|Sound Rating||80 db|
|Collection Bag||3 – 6 Mil|
|Maintenance||Clean impeller housing frequently. Replace filter bag.|
|Extension Cord Gauge||12AWG MINIMUM Extension Cord Length: 25′ / 7.6m MAXIMUM
*** Failure to meet these min. requirements can cause damage
T2 THROUGHPUT SPECS
Twister’s proprietary single-piece flow design allows for continuous run time with no interruptions or downtime. Add conveyors to perform ongoing quality control throughout your trimming process. Run in configurations up to 3 in a row, for a total production speed of up to 120 lbs/hr! Start with one, add a second, and when you’re ready slide in the third. No additional labor is required!